JM-438D直接驱动式电脑钉扣机

产品介绍：

循环时间业内最快，生产效率具有压倒性优势

切线后无需进行再处理

为使余线长度最短，采用了专用的移动刀和固定刀，并将固定刀配置在靠近布料的位置。切线后，线头余线长度为2~5mm，无需再进行摘线工序。

Product Introduction：

Quickest circulation time in the industry,higher production effciency

Max Sewing speed 3200rpm(JM-438D) further enhanced production efficiency easy and exact orientation of sewing material, presser foot device controlled bu impulse motor, and height of presser foot set lor 2 stages to achieve easy sewing malerial orienlaslion and reduced set time, and press operating padel slightly, its response is very good and noise is much more reduced as well.

Unnecessary to redo
After being cut in orde to get shortest end of thread , special moving knife and fixed knife are applied , and put the fixed knile be aside sewing material.
After being cut, end of thread is of 2-2.5mm lenglh and unnecessary to redo it.